Search

Results

Input/Output (IO) CFLink Protocol: 34 Hits

====== Input/Output (IO) CFLink Protocol ====== The following documentation describes the CFLink protocol for controlling IO ports on any device with IO's.\\ This includes IO modules and standalone dev... ''STA'' (Status) query returns the status of all IO ports in a single module. === Data === <sxh cfli... DATA>[F5][F5] </sxh> * **<IODATA>** = For each IO port in the module, the port status is returned i

Error Codes: 8 Hits

te * 402 = Invalid Relay State ===== 425 - 449: IO Error Codes ===== * 425 = ''PRT'' Invalid IO Port Mode * 426 = ''PRT'' Invalid IO Port Minimum Change * 427 = ''PRT'' Invalid IO Port Power On State * 428 = ''SET'' Invalid IO State * 429 = ''CFG'' Invalid IO Reporting Interval * 430 = ''CFG'' Invalid IO Report On Change * 431 = ''CFG'' Invalid IO Enabled ===== 450 - 474: IR Error

I/O Tab: 8 Hits

{{:hardware:cf-mini:cf-mini-configuration:cf_mini_io_tab.png?nolink|}} This page is under constructio... == * **Enabled** = Enable or disable the entire IO functionality of the CF Mini. Disabling is useful... red. * **Report Interval** = How frequently the IO port status is reported on the bus. Use a value o... lue above zero to force the CF Mini to report the IO port status at frequent intervals automatically.

Common Device Protocol: 5 Hits

luding (but not limited to): * ''IOX'' is for IO port notifications (modules or onboard IO ports).... ue> // Retreive the notification settings for all IO modules in a MOD4 on CFLink ID [04] > [F2][04][F3... F4][F5][F5] // Reply, notification config for any IO modules in the MOD4 < [F2][04][F3]RIOXTGT[F4]07:2... he notification targets for the status command of IO modules in a MOD4 on CFLink ID [04] // Notificati

CF Mini: 3 Hits

put/Output ==== The top left connector contains 4 IO ports. Each port can be configured as either: ... - Port 4 Input - Port 4 Ground {{:hardware:io_externalrelay.svg|}} ==== Relay ==== The top rig... evice-resetting|Device Resetting Page]]. {{tag>hardware cf_mini cflink ir io relay rs232 serial com}}

MOD4/DIN-MOD4 CFLink Protocol: 2 Hits

nput/Output ports: [[hardware:cflink:input-output-io-module-cflink-protocol|Follow documentation for IO Modules]] * Relay ports: [[hardware:cflink:relay-modules|Follow documentation for Relay Modules]

CFLink Protocol: 2 Hits

ocumentation]] * [[hardware:cflink:input-output-io-module-cflink-protocol|Input/Output (IO) CFLink P

CF Mini CFLink Protocol: 2 Hits

nput/Output ports: [[hardware:cflink:input-output-io-module-cflink-protocol|Follow documentation for IO Modules]] * Relay ports: [[hardware:cflink:relay-modules|Follow documentation for Relay Modules]

Quick Start Guide Page 2 - System Commander: 2 Hits

mmander_port_testing_ir.png?direct&600 |}} \\ For IO ports, we can see their current input or output s... r:quick-start-guide:system_commander_port_testing_io.png?direct&600 |}}\\ [[http://www.youtube.com/wat

Notification Targets: 2 Hits

ming data notifications. * ''IOX'' - Used for IO port read state changes (dry contacts, resistance... nput read state changes. * ''IOX'' - Used for IO module port read state changes (dry contacts, res

Formatting Syntax: 1 Hits

lus, html, html5, icon, idl, ini, inno, intercal, io, j, java5, java, javascript, jquery, kixtart, klo

Control4 Integration: 1 Hits

an also fit into alot of tight spaces which other IO expanders cannot. CF-Link cabling can also go up

System Commander Release Notes: 1 Hits

==== * Fixed IR Rule duplication issues * Fix IO port refreshing * Fix issues where CFLink data

Target Notification Tab: 1 Hits

incoming data notifications.\\ ''IOX'' - Used for IO port read state changes (dry contacts, resistance

Target Notification Tab: 1 Hits

Get iOS UDID: 1 Hits

Solo: 1 Hits

MOD-IO8: 1 Hits

MOD-IO8 Configuration: 1 Hits