CommandFusion Wiki

Documentation Resources

User Tools

Site Tools


Sidebar

hardware:cards:card-cflink

CARD-CFLINK

This card adds CFLink bus bus connectivity to the Solo controller.
The Solo can then communicate with other CommandFusion hardware devices on the CFLink bus.
Pins 4 and 5 on the connector can be used to power the Solo from the CFLink bus. See the wiring examples.

Pinout

The card is supplied with a 5-pin screw terminal connector, with the following pinout (left to right):

  1. Data Ground
  2. Data +
  3. Data -
  4. DC + (9-30V DC)
  5. DC - (9-30V DC)
hardware/cards/card-cflink.txt · Last modified: 2015/07/16 03:43 by jarrod