This is an old revision of the document!
The CommandFusion IR Blaster is a multi-function IR device, capable of both sending and receiving IR signals.
Using the IR receivers (on-board or via an external receiver input) you can trigger rules within the CFLink network, essentially using macros to control anything within the CFLink network.
The information panel can be found on the top of the IR Blaster.
The front and sides of the IR Blaster contain high power IR emitters, capable of flooding a room with IR.
The front of the IR Blaster contains an IR receiver.
An IR emitter can be plugged in via the first 3.5mm mono jack, allowing a second channel of directional IR output.
An external IR Receiver can be plugged in via the second 3.5mm mono jack.
The 5-pin CFLink connector is used to communicate with other CFLink devices on the network.
The MicroSD slot is used to expand the on-board memory via MicroSD cards.
For information on how to rest your device to factory settings, see the Device Resetting Page.