The following documentation is for the IRBlaster device CFLink protocol messages.

The SND (Send) command is used to send an IR command via one or more IR ports on the IRBlaster.

> [F2]<ID>[F3]TIRBSND[F4]<PORT>:<IR_FORMAT>:<IR_DATA>[F5][F5]

• <PORT> = The IR port to send the IR data from. 3 chars, uppercase 'P' followed by the port number (2 digits)
  • P01 = On-board Blaster output
  • P02 = Secondary emitter output
  • PZZ = Send IR out both ports consecutively.
• <IR_FORMAT> = The format of the <IR_DATA> to send:
  • DBA - Send an IR command from the internal database.
  • MEM - Send a learned IR code that is stored on the device memory.
  • RAW - Send an IR code in raw hex format, eg. CCF codes.
  • STR - Send an IR code in CommandFusion's proprietary format.
• <IR_DATA> = The data of the IR code to send. The format depends on the <IR_FORMAT> chosen:
  • DBA - <DEVICE_TYPE>:<CODE_SET>:<KEY> - See the [IR Database Documentation](irdatabase.html) for more details.
    • <DEVICE_TYPE> = The number corresponding to the type of device. (2 digits)
    • <CODE_SET> = The code set number from the Database table.
    • <KEY> = The key code from the Database table.
  • MEM - <DEVICE>:<FUNCTION>
    • <DEVICE> = The name of the device, as stored in the IR file.
    • <FUNCTION> = The name of the IR function to send, within the device IR file.
  • RAW - <HEX_CODE> - The raw hex code (Often called CCF) to send. Only 'learned' IR codes (starting with 0000) are allowed.
  • STR - <CF_IR_FORMAT> - generated by IR Learner software

Note that a single SND command can contain multiple ports to send to, using the standard port separators