4 × mains voltage solid-state relays.
Quiet, fast, reliable relay switching.
The SSRY4 module features 4 × 250V AC 2A solid-state relays. Perfect for relay control applications where noise, speed or life span is important.
Simple to use.
As with all CommandFusion products, our communication protocol is open and available to anyone. Relay modules have very simple commands for setting the relay states on, off, toggling and pulsing. » View CFLink Protocol Docs
Need more relay ports?
Just get another module.
The beauty of the modular controllers is their flexibility. Need more of a specific port? Get another module and plug it in.
The RY4 module uses detachable screw terminal blocks for wire connections. This allows for convenient removal.
The SSRY4 module features 4 high voltage (250V AC, 2A) solid-state relay ports, and comes with detachable screw terminal blocks for secure connections to external relay-controlled high-voltage devices. Plug it into a modular controller to add relay control ports to your system. The benefit of solid-state relays are their extremely low noise (almost silent) switching, typical 10x faster switching, dramatically longer lifetime and more reliable (no moving parts).
Power On States
Each relay port can be configured to be in open, closed or resume last state on power up. Using the resume option, they will return to their open or closed state after a power loss.
Most relay control systems out there allow you to set relays on or off, and require complex programming on a control processor to perform anything else. Our relay control protocol includes additional functionality such as a simple toggle command (so that you don't have to keep track of the relay state for basic toggle actions) and a pulsing command to pulse the relay closed for a time period, then opening again (of course, the time period is customisable as part of the protocol). Relay control has never been so easy.
GalleryHigh res photos in downloads section
Technical SpecificationsSee hardware documentation for more details
|Module Connector||24-pin connector to connect to modular controller unit|
|Relay 1-4||4 sets of detachable 3-pin screw terminal blocks (included) consisting of 4 normally-open relay channels
Wire range: 28-14 AWG
Relay Rating: 250V AC 2A
|Clip||Secures and releases the module from the modular controller unit.|
|Label||Model and serial number information.|
|Power Consumption||Power usage 500mW maximum, powered by modular controller DIN-MOD4 or MOD4 (not included)|
|Enclosure||Polycarbonate with dark grey matte finish|
|Weight||0.07kg (0.15lbs), Shipping 0.2kg (0.44lbs)|
|Environmental & Regulatory|
|Temperature||5°C to 45°C (41°F to 113°F)|
|Humidity||20% to 85% RH, non-condensing|
|Certification||FCC, CE, C-Tick|
|Warranty||5 years limited warranty|
Downloads & Documentation
Modules Quick Reference Guide includes details for all of our modules, such as pinout diagrams and general connectivity details.
Single page specification sheet.