This shows you the differences between two versions of the page.
hardware:modules:mod-io8 [2012/08/10 01:30] aaron created |
hardware:modules:mod-io8 [2017/07/03 22:42] (current) jarrod |
||
---|---|---|---|
Line 1: | Line 1: | ||
====== MOD-IO8 ====== | ====== MOD-IO8 ====== | ||
+ | The MOD-IO8 is a modular unit, featuring 8 configurable I/O (input/output) ports with spring terminals for quick and easy, yet secure connections. Plug it into a modular controller to add I/O ports to your system. | ||
+ | <WRAP important round> | ||
+ | === Max Input Voltage === | ||
+ | 30V DC, 1A. | ||
+ | </WRAP> | ||
+ | |||
+ | ===== Modes ===== | ||
+ | Each port can be customised into any of the following input or output modes: | ||
+ | |||
+ | * Dry Contact Input | ||
+ | * Resistance Reading Input (0 - 10,000 Ohms, in 100 Ohm increments) | ||
+ | * Voltage Reading Input (0 - 10 Volts DC, in 0.1V increments) | ||
+ | * Digital Voltage Input - detect presence of voltage (30V DC MAX) | ||
+ | * Video Sensing Input - configurable detection range (0 - 10V DC) | ||
+ | * External Relay Output (0 - 24V DC, external power supply required) | ||
+ | * LED Output (5V DC, 1mA) | ||
+ | |||
+ | ===== Ports ===== | ||
+ | Front of the module has four detachable screw terminal blocks.\\ | ||
+ | |||
+ | **Pinout - Top Row, Terminal Block 1** | ||
+ | - Port 1 Input/+ | ||
+ | - Port 1 Ground | ||
+ | - Port 2 Input/+ | ||
+ | - Port 2 Ground | ||
+ | |||
+ | **Pinout - Top Row, Terminal Block 2** | ||
+ | - Port 3 Input/+ | ||
+ | - Port 3 Ground | ||
+ | - Port 4 Input/+ | ||
+ | - Port 4 Ground | ||
+ | |||
+ | **Pinout - Bottom Row, Terminal Block 1** | ||
+ | - Port 5 Input/+ | ||
+ | - Port 5 Ground | ||
+ | - Port 6 Input/+ | ||
+ | - Port 6 Ground | ||
+ | |||
+ | **Pinout - Bottom Row, Terminal Block 2** | ||
+ | - Port 7 Input/+ | ||
+ | - Port 7 Ground | ||
+ | - Port 8 Input/+ | ||
+ | - Port 8 Ground | ||
+ | |||
+ | |||
+ | {{:hardware:io_externalrelay.svg|}} |