You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.
====== CF Mini ======
The CF Mini is a multi-functional controller with the following features:
* 8 x... D Slot
===== Quick Reference Guide =====
The CF Mini Quick Reference Guide provides the basic informat... mmandfusion.com/cfmini.html#downloads|Find the CF Mini Quick Reference Guide here.]]
===== CFLink Protoc... etails on the CFLink protocol supported by the CF Mini, see the [[hardware:cflink:cf-mini-cflink-protoco
to trigger a macro is a dry contact input on a CF Mini, then the rule should be configured on the CF Mini. \\
If the event was a specific incoming string from an RS232 port, then the rule should be config... urn on a bluray player.\\
\\
So, we select the CF Mini in the devices tree, then click on the ''Rules'' ... een. This is done using a relay connected to a CF Mini.\\
Click on ''Add Action'', then ''Action Builde
infrared commands through the IR ports on your CF Mini.
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_ir_tab.png?nolink|}}
===== 1 - Port =====
Select the IR port you want to send the command from. These ports are labelled on your CF Mini.
===== 2 - Format =====
Select the format you wish to send... a Builder - On-Board Database ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder.png?nolink|
ules, cards and standalone devices such as the CF Mini
===== Queries =====
==== STA - Query Status ====... 4:0[F5][F5]
// Query the state of relays in a CF Mini on CFLink ID [06]
> [F2][06][F3]QRLYSTA[F4][F5][F5]
// Reply - CF Mini has 4 relay ports, all are open except port 1 which is closed.
< [F2][06][F3]R... r on
// Query the power on state of relays in CF Mini on CFLink ID [06]
> [F2][06][F3]QRLYPOS[F4][F5][F
====== Relay Tab ======
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_relay_tab.png?nolink|}}
=====... power on state for each of the relays in your CF Mini.
The options available are:
* Open - the relay... his section to manually test each relay on the CF Mini. The image shows the current relay state as per below image.
{{:hardware:cf-mini:cf-mini-configuration:relay_testing.png?nolink|}}
The buttons allo
=== Target Notification Tab ======
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_target_notification... o configure these Target Notifications for the CF Mini.
===== Configuration =====
<WRAP left round todo... act us via our Support Page.]]
</WRAP>
===== CF Mini Target Notification Types =====
''MIN'' - Used fo
====== I/O Tab ======
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_io_tab.png?nolink|}}
This page ... or disable the entire IO functionality of the CF Mini. Disabling is useful for a few reasons:
- Red... enabled). Use a value above zero to force the CF Mini to report the IO port status at frequent interval
====== iPad Mini ======
<WRAP center round info 60%>
There are currently no known issues with CommandFusion iViewer and the iPad Mini.
</WRAP>
iViewer works as intended with the iPad Mini.\\
\\
When usin... ting under Page Size. This setting works for all iPads.
{{tag>iPad-MiniMini iPad iViewer guiDesigner}}
====== CF Mini Configuration ======
Configuring the CF Mini is done via the Windows Application called ... abs are available in System Commander for each CF Mini.
{{indexmenu>hardware:cf-mini:CF-Mini-configurat
a Builder - On-Board Database ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder.png?nolink|... ata Builder - On Board Memory ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder_mem.png?nol
a Builder - On-Board Database ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder.png?nolink|... ata Builder - On Board Memory ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder_mem.png?nol
ase, this is done by pulsing relay port 1 of a CF Mini to close for 1 second. So choose the ''Relay'' action type and ''CF Mini'' target device, then select port 1 and set it to pulse for 1 second.\\
<WRA... , otherwise you will not be able to select the CF Mini.
</WRAP>
Press ''OK'' and again the CFLink comma... format \x00 to \xFF. See our [[hardware:cflink:cf-mini-cflink-protocol|CFLink protocol documentation]] f
====== CF Mini CFLink Protocol ======
The following documentation describes the CFLink protocol for [[hardware:cf-mini|CF Mini]] devices.\\
\\
The CF Mini uses the same protocols as modules containing si
earner =====
The CommandFusion IR Learner uses a mini USB connector and ships with a mini USB cable to ... s uploaded to CommandFusion hardware such as a CF Mini. You must also enter the device family and manufa... r selected CommandFusion hardware, such as the CF Mini, IR Blaster or MOD4 using our System Commander so