CommandFusion Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Gui Wont Upload To Device - iViewer/guiDesigner======
**Problem:** guiDesigner wont upload to device running iViewer.

=== Possible Solutions ===
  - Check your upload port. If you've used a different port other than the default port previously, you'll need to change it. Every time you install a new guiD the upload port will revert back to the default 8019.
  - Check your firewall - it could be blocking any incoming connections after the install. Try disabling the firewall and see if this fixes the issue.
  - If you have [[software:iviewer:settings#multitasking|Multitasking]] switched on on [[software:iviewer:settings|iViewer settings]], you will need to kill the app before it will reload the gui. Try switching multitasking off.

If these solutions do not solve the problem, submit a ticket or navigate to the Google Groups via our [[http://www.commandfusion.com/support.html|Support Page]].

CommandFusion Wiki

User Tools

Site Tools

Page Tools