User Tools
hardware:cflink:input-output-io-module-cflink-protocol
Differences
This shows you the differences between two versions of the page.
|
hardware:cflink:input-output-io-module-cflink-protocol [2012/09/27 04:41] jarrod |
hardware:cflink:input-output-io-module-cflink-protocol [2013/03/26 05:34] (current) jarrod [PRT - Configure Port Settings] |
||
|---|---|---|---|
| Line 14: | Line 14: | ||
| * ''R'' = ''R''esistance reading input, <STATE> = ''000''-''100'' (0 to 10,000 Ohms in 100 Ohm increments) | * ''R'' = ''R''esistance reading input, <STATE> = ''000''-''100'' (0 to 10,000 Ohms in 100 Ohm increments) | ||
| * ''A'' = ''A''nalog Voltage reading input, <STATE> = ''000''-''100'' (00.0 to 10.0 Volts DC in 0.1 Volt increments) | * ''A'' = ''A''nalog Voltage reading input, <STATE> = ''000''-''100'' (00.0 to 10.0 Volts DC in 0.1 Volt increments) | ||
| - | * ''V'' = Digital Voltage reading input, <STATE> = ''0'' for voltage below threshold, ''1'' for voltage equal to or above threshold | + | * ''V'' = Digital ''V''oltage reading input, <STATE> = ''0'' for voltage below threshold, ''1'' for voltage equal to or above threshold |
| - | * ''S'' = Video Sensing input, <STATE> = ''0'' for no video sensed, ''1'' for video sensed. | + | * ''S'' = Video ''S''ensing input, <STATE> = ''0'' for no video sensed, ''1'' for video sensed. |
| - | * ''E'' = External relay control output, 0-24V DC (external power supply required), <STATE> = ''0'' for OFF, ''1'' for ON. | + | * ''E'' = ''E''xternal relay control output, 0-24V DC (external power supply required), <STATE> = ''0'' for OFF, ''1'' for ON. |
| - | * ''L'' = LED output (1mA), <STATE> = ''0'' for OFF, ''1'' for ON. | + | * ''L'' = ''L''ED output (5V DC, 1mA), <STATE> = ''0'' for OFF, ''1'' for ON. |
| ===== Queries ===== | ===== Queries ===== | ||
| Line 27: | Line 27: | ||
| === Data === | === Data === | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| - | > // Modular devices | + | // Modular devices |
| > [F2]<ID>[F3]QIOXSTA[F4]<MODULE>[F5][F5] | > [F2]<ID>[F3]QIOXSTA[F4]<MODULE>[F5][F5] | ||
| - | > // Standalone devices | + | // Standalone devices |
| > [F2]<ID>[F3]QIOXSTA[F4][F5][F5] | > [F2]<ID>[F3]QIOXSTA[F4][F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 75: | Line 75: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| > [F2]<ID>[F3]QIOXPRT[F4]<MODULE>[F5][F5] | > [F2]<ID>[F3]QIOXPRT[F4]<MODULE>[F5][F5] | ||
| + | // Standalone devices | ||
| + | > [F2]<ID>[F3]QIOXPRT[F4][F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 85: | Line 87: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| < [F2]<ID>[F3]RIOXPRT[F4]<MODULE>|<PORT_CONFIG>[F5][F5] | < [F2]<ID>[F3]RIOXPRT[F4]<MODULE>|<PORT_CONFIG>[F5][F5] | ||
| + | // Standalone devices | ||
| + | < [F2]<ID>[F3]RIOXPRT[F4]<PORT_CONFIG>[F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 126: | Line 130: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| > [F2]<ID>[F3]QIOXCFG[F4]<MODULE>[F5][F5] | > [F2]<ID>[F3]QIOXCFG[F4]<MODULE>[F5][F5] | ||
| + | // Standalone devices | ||
| + | > [F2]<ID>[F3]QIOXCFG[F4][F5][F5] | ||
| </sxh> | </sxh> | ||
| * **<MODULE>** = The module number to request the module configuration of. 2 chars, uppercase 'M' followed by the module number. | * **<MODULE>** = The module number to request the module configuration of. 2 chars, uppercase 'M' followed by the module number. | ||
| Line 135: | Line 141: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| < [F2]<ID>[F3]RIOXCFG[F4]<MODULE>:<ENABLED>:<REPORT_ON_CHANGE>:<REPORT_INTERVAL>[F5][F5] | < [F2]<ID>[F3]RIOXCFG[F4]<MODULE>:<ENABLED>:<REPORT_ON_CHANGE>:<REPORT_INTERVAL>[F5][F5] | ||
| + | // Standalone devices | ||
| + | < [F2]<ID>[F3]RIOXCFG[F4]<ENABLED>:<REPORT_ON_CHANGE>:<REPORT_INTERVAL>[F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 160: | Line 168: | ||
| < [F2][04][F3]RIOXCFG[F4]M1:1:1:36000[F5][F5] | < [F2][04][F3]RIOXCFG[F4]M1:1:1:36000[F5][F5] | ||
| // IO module is enabled, report on change is enabled, reports status every hour. | // IO module is enabled, report on change is enabled, reports status every hour. | ||
| - | |||
| </sxh> | </sxh> | ||
| Line 177: | Line 184: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| > [F2]<ID>[F3]CIOXPRT[F4]<MODULE>|<PORT_CONFIG>[F5][F5] | > [F2]<ID>[F3]CIOXPRT[F4]<MODULE>|<PORT_CONFIG>[F5][F5] | ||
| + | // Standalone devices | ||
| + | > [F2]<ID>[F3]CIOXPRT[F4]<PORT_CONFIG>[F5][F5] | ||
| </sxh> | </sxh> | ||
| * **<PORT_CONFIG>** = See the definition under the ''PRT'' Query for more details. | * **<PORT_CONFIG>** = See the definition under the ''PRT'' Query for more details. | ||
| Line 196: | Line 205: | ||
| // Port 5 = External relay control, Power On State = Off | // Port 5 = External relay control, Power On State = Off | ||
| // Port 6 = LED ouput, Power On State = On | // Port 6 = LED ouput, Power On State = On | ||
| - | // Port 7 = Dry contact | + | // Port 7 = Video Sense Input |
| // Port 8 = Dry contact | // Port 8 = Dry contact | ||
| - | > [F2][05][F3]CIOXPRT[F4]M1|P01:D:0:0|P02:D:0:0|P03:R:15:0|P04:V:12:0|P05:E:0:0|P06:L:0:1|P07:D:0:0|P08:D:0:0[F5][F5] | + | > [F2][05][F3]CIOXPRT[F4]M1|P01:D:0:0|P02:D:0:0|P03:R:15:0|P04:V:12:0|P05:E:0:0|P06:L:0:1|P07:S:0:0|P08:D:0:0[F5][F5] |
| // Reply | // Reply | ||
| < [F2][05][F3]RIOXPRT[F4]M1|P01:D:0:0|P02:D:0:0|P03:R:15:0|P04:V:12:0|P05:E:0:0|P06:L:0:1|P07:D:0:0|P08:D:0:0[F5][F5] | < [F2][05][F3]RIOXPRT[F4]M1|P01:D:0:0|P02:D:0:0|P03:R:15:0|P04:V:12:0|P05:E:0:0|P06:L:0:1|P07:D:0:0|P08:D:0:0[F5][F5] | ||
| Line 218: | Line 227: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| > [F2]<ID>[F3]CIOXCFG[F4]<MODULE>:<ENABLED>:<REPORT_ON_CHANGE>:<REPORT_INTERVAL>[F5][F5] | > [F2]<ID>[F3]CIOXCFG[F4]<MODULE>:<ENABLED>:<REPORT_ON_CHANGE>:<REPORT_INTERVAL>[F5][F5] | ||
| + | // Standalone devices | ||
| + | > [F2]<ID>[F3]CIOXCFG[F4]<ENABLED>:<REPORT_ON_CHANGE>:<REPORT_INTERVAL>[F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 235: | Line 247: | ||
| // Reply | // Reply | ||
| < [F2][05][F3]RIOXCFG[F4]M1:1:1:00600[F5][F5] | < [F2][05][F3]RIOXCFG[F4]M1:1:1:00600[F5][F5] | ||
| - | |||
| </sxh> | </sxh> | ||
| Line 257: | Line 268: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| > [F2]<ID>[F3]TIOXSET[F4]<MODULE>|<OUTPUTDATA>[F5][F5] | > [F2]<ID>[F3]TIOXSET[F4]<MODULE>|<OUTPUTDATA>[F5][F5] | ||
| + | // Standalone devices | ||
| + | > [F2]<ID>[F3]TIOXSET[F4]<OUTPUTDATA>[F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 272: | Line 285: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| < [F2]<ID>[F3]RIOXSTA[F4]<MODULE>|<IODATA>[F5][F5] | < [F2]<ID>[F3]RIOXSTA[F4]<MODULE>|<IODATA>[F5][F5] | ||
| + | // Standalone devices | ||
| + | < [F2]<ID>[F3]RIOXSTA[F4]<IODATA>[F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 307: | Line 322: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| < [F2]<ID>[F3]RIOXSTA[F4]<MODULE>|<IODATA>[F5][F5] | < [F2]<ID>[F3]RIOXSTA[F4]<MODULE>|<IODATA>[F5][F5] | ||
| + | // Standalone devices | ||
| + | < [F2]<ID>[F3]RIOXSTA[F4]<IODATA>[F5][F5] | ||
| </sxh> | </sxh> | ||
| Line 337: | Line 354: | ||
| <sxh cflink; light: true> | <sxh cflink; light: true> | ||
| + | // Modular devices | ||
| < [F2]<ID>[F3]RIOXCHA[F4]<MODULE>|<IODATA>[F5][F5] | < [F2]<ID>[F3]RIOXCHA[F4]<MODULE>|<IODATA>[F5][F5] | ||
| + | // Standalone devices | ||
| + | < [F2]<ID>[F3]RIOXCHA[F4]<IODATA>[F5][F5] | ||
| </sxh> | </sxh> | ||
hardware/cflink/input-output-io-module-cflink-protocol.1348720904.txt.gz · Last modified: 2012/09/27 04:41 by jarrod
