User Tools
software:knowledge-base:gui-wont-upload-to-device
Differences
This shows you the differences between two versions of the page.
|
software:knowledge-base:gui-wont-upload-to-device [2013/10/18 01:42] jarrod |
software:knowledge-base:gui-wont-upload-to-device [2013/10/31 00:34] (current) aaron |
||
|---|---|---|---|
| Line 2: | Line 2: | ||
| **Problem:** guiDesigner wont upload to device running iViewer. | **Problem:** guiDesigner wont upload to device running iViewer. | ||
| - | You may be always getting the same GUI, or the default GUI, on launch. | + | You may be always getting the same GUI, or the default GUI, on launch.\\ |
| You may get an error such as "NSXMLParserErrorDomain error 4" | You may get an error such as "NSXMLParserErrorDomain error 4" | ||
| Line 9: | Line 9: | ||
| - Check that your mobile device and PC running guiDesigner are on the same network subnet. For example, if the PC is on IP address 192.168.0.100, then your mobile device should be in the range 192.168.0.1 to 192.168.0.254. | - Check that your mobile device and PC running guiDesigner are on the same network subnet. For example, if the PC is on IP address 192.168.0.100, then your mobile device should be in the range 192.168.0.1 to 192.168.0.254. | ||
| - Check your upload port. If you've used a different port other than the default port previously, you'll need to change it. Every time you install a new guiD the upload port will revert back to the default 8019. | - Check your upload port. If you've used a different port other than the default port previously, you'll need to change it. Every time you install a new guiD the upload port will revert back to the default 8019. | ||
| + | - Try using a different port number. It is possible that the default port 8019 is being used by another application eg. Quickbooks uses Port 8019 by default also. | ||
| - Check your firewall - it could be blocking any incoming connections after the install. Try disabling the firewall and see if this fixes the issue. | - Check your firewall - it could be blocking any incoming connections after the install. Try disabling the firewall and see if this fixes the issue. | ||
| - If you have [[software:iviewer:settings#multitasking|Multitasking]] switched on in [[software:iviewer:settings|iViewer settings]], you will need to kill the app before it will reload the gui. Try switching multitasking off then killing the app by double pressing the home button and | - If you have [[software:iviewer:settings#multitasking|Multitasking]] switched on in [[software:iviewer:settings|iViewer settings]], you will need to kill the app before it will reload the gui. Try switching multitasking off then killing the app by double pressing the home button and | ||
software/knowledge-base/gui-wont-upload-to-device.1382060550.txt.gz ยท Last modified: 2013/10/18 01:42 by jarrod
