This shows you the differences between two versions of the page.
hardware:getting-started [2013/02/25 04:21] aaron [Configuration] |
hardware:getting-started [2013/05/03 00:09] (current) aaron [Configuration] |
||
---|---|---|---|
Line 15: | Line 15: | ||
===== Configuration ===== | ===== Configuration ===== | ||
+ | Please ensure you have updated to the latest firmware as described above before configuring your hardware. | ||
- | Once the hardware has been updated to the latest firmware, you can use the [[http://www.commandfusion.com/systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling.\\ | ||
- | \\ | ||
System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ | System Commander can discover and configure devices over Ethernet (if you are using a LAN Bridge) or RS232 for any device with an on-board RS232 port.\\ | ||
\\ | \\ | ||
[[http://www.commandfusion.com/systemcommander.html|Download System Commander Here.]] | [[http://www.commandfusion.com/systemcommander.html|Download System Commander Here.]] | ||
- | \\ | + | |
- | \\ | + | ==== Configuration - When Controlling Via iViewer ==== |
+ | If you are using iViewer to control CommandFusion hardware, you can use our guiDesigner plugin [[software:gui-designer:cflink-builder|"CFLink Command Builder"]] to easily setup control of the hardware via guiDesigner.\\ | ||
+ | |||
+ | ==== Configuration - When Not Controlling Via iViewer ==== | ||
+ | Use the [[http://www.commandfusion.com/systemcommander.html|System Commander]] software to configure the devices properties as required, send test commands, and program rules and scheduling. | ||
+ | |||
+ | |||
===== Quick Start Guide ===== | ===== Quick Start Guide ===== | ||
For instructions on how to get started with System Commander and CommandFusion Hardware, see our [[software:system-commander:quick-start-guide|System Commander Quick Start Guide.]] | For instructions on how to get started with System Commander and CommandFusion Hardware, see our [[software:system-commander:quick-start-guide|System Commander Quick Start Guide.]] |