Differences

This shows you the differences between two versions of the page.

--- hardware:lan-bridge:lan-bridge-configuration:slots-tab [2014/02/15 09:55]
jarrod
+++ hardware:lan-bridge:lan-bridge-configuration:slots-tab [2014/02/17 14:29] (current)
jarrod [Slot Startup Commands]
@@ Line 62: / Line 62: @@
 ==== 3 - CFLink ID ====
-If ''Destination Slot'' is configured to ''CFLink'', the CFLink ID is the device on the CFLink network to forward data to/from. This allows you to subscribe a communication slot to a single device on the CFLink bus.
+If ''Destination Slot'' is configured to ''CFLink'', the CFLink ID is the device on the CFLink network to forward data to/from. This allows you to subscribe a communication slot to a single device on the CFLink bus.\\
+Use a value of ''FF'' to broadcast all data received from the ''Slot'' to all devices on the CFLink bus. Doing this requires that the incoming data be a valid CFLink Protocol packet or it will be ignored.
 ==== 4 - Module ====
@@ Line 77: / Line 78: @@
 So if the incoming data was ''[F2]<CFLinkID>[F3]RRLYSTA[F4]P01:1|P02:0|P03:0|P04:1[F5][F5]'', then the resulting data sent to the ''Slot'' would be simply ''P01:1|P02:0|P03:0|P04:1''.
-===== Slot Startup Commands =====
+===== Slot Startup Commands - COMING SOON IN FIRMWARE UPDATE =====
 {{:hardware:lan-bridge:lan_bridge_slots_tab-2.png?nolink|}}

CommandFusion Wiki