You can find the results of your search below. If you didn't find what you were looking for, you can create or edit the page named after your query with the appropriate tool.
====== CFMini ======
The CFMini is a multi-functional controller with the following features:
* 8 x IR... roSD Slot
===== Quick Reference Guide =====
The CFMini Quick Reference Guide provides the basic informat... .commandfusion.com/cfmini.html#downloads|Find the CFMini Quick Reference Guide here.]]
===== CFLink Protoc... r details on the CFLink protocol supported by the CFMini, see the [[hardware:cflink:cf-mini-cflink-protocol|CFMini CFLink Protocol page]].
===== Information Panel
ed to trigger a macro is a dry contact input on a CFMini, then the rule should be configured on the CFMini. \\
If the event was a specific incoming string from an RS232 port, then the rule should be config... d turn on a bluray player.\\
\\
So, we select the CFMini in the devices tree, then click on the ''Rules'' ... screen. This is done using a relay connected to a CFMini.\\
Click on ''Add Action'', then ''Action Builde
ng infrared commands through the IR ports on your CFMini.
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_ir_tab.png?nolink|}}
===== 1 - Port =====
Select the IR port you want to send the command from. These ports are labelled on your CFMini.
===== 2 - Format =====
Select the format you wish to send... Data Builder - On-Board Database ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder.png?nolink|}}
Use
modules, cards and standalone devices such as the CFMini
===== Queries =====
==== STA - Query Status ====... |P04:0[F5][F5]
// Query the state of relays in a CFMini on CFLink ID [06]
> [F2][06][F3]QRLYSTA[F4][F5][F5]
// Reply - CFMini has 4 relay ports, all are open except port 1 which is closed.
< [F2][06][F3]R... ower on
// Query the power on state of relays in CFMini on CFLink ID [06]
> [F2][06][F3]QRLYPOS[F4][F5][F
====== Relay Tab ======
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_relay_tab.png?nolink|}}
===== 1 - Relay Port Settings =====
Th... the power on state for each of the relays in your CFMini.
The options available are:
* Open - the relay... e this section to manually test each relay on the CFMini. The image shows the current relay state as per below image.
{{:hardware:cf-mini:cf-mini-configuration:relay_testing.png?nolink|}}
The buttons allow you ch
back
* Ability to utilise the RS232 port on the CFMini or Lan Bridge for control over the CF devices or ... The GPIO's can be configured to accept this.
The CFMini can also be configured for digital voltage. You ... es you feedback at a specific voltage level.
The CFMini can also fit into alot of tight spaces which other IO expanders cannot.
CF-Link cabling can also go upto 1 kilometer which may resolve issues f
====== Target Notification Tab ======
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_target_notification_tab.png?nolink|}}
Within the... u to configure these Target Notifications for the CFMini.
===== Configuration =====
<WRAP left round todo... ontact us via our Support Page.]]
</WRAP>
===== CFMini Target Notification Types =====
''MIN'' - Used fo
====== CFMini Configuration ======
Configuring the CFMini is done via the Windows Application called [[s... n tabs are available in System Commander for each CFMini.
{{indexmenu>hardware:cf-mini:CF-Mini-configurat
====== I/O Tab ======
{{:hardware:cf-mini:cf-mini-configuration:cf_mini_io_tab.png?nolink|}}
This page is under construction and not com... ble or disable the entire IO functionality of the CFMini. Disabling is useful for a few reasons:
- Red... if enabled). Use a value above zero to force the CFMini to report the IO port status at frequent interval
les and standalone devices such as the [[hardware:cf-mini|CFMini]], [[hardware:ir-blaster|IR Blaster]] and [[hardw... F5]
// Send a database IR code to IR port 2 of a CFMini on CFLink ID [20].
> [F2][20][F3]TIRXSND[F4]P02:DBA:06:1033:01[F5][F5]
// Reply from CFMini when IR command has been sent
< [F2][20][F3]RIRXSND[F4][... 452 = Invalid IR Memory Parameters
* 453 = Invalid IR Raw Hex Code
* 454 = Invalid CF IR format
e case, this is done by pulsing relay port 1 of a CFMini to close for 1 second. So choose the ''Relay'' action type and ''CFMini'' target device, then select port 1 and set it to pulse for 1 second.\\
<WRA... rst, otherwise you will not be able to select the CFMini.
</WRAP>
Press ''OK'' and again the CFLink comma... he format \x00 to \xFF. See our [[hardware:cflink:cf-mini-cflink-protocol|CFLink protocol documentation]] f
Data Builder - On-Board Database ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder.png?nolink|}}
Use ... R Data Builder - On Board Memory ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder_mem.png?nolink|}}
U
le management for housing 2 units of MOD4.
==== CFMini ====
The [[hardware:cf-mini|CFMini]] is a multif... ntegrators. Featuring the thinnest emitting head, mini 3.5mm mono jack, smoothly designed wire gauge ste... ring up our series of hardware and devices.
==== CF Solo ====
The CommandFusion Solo is an network-en
Data Builder - On-Board Database ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder.png?nolink|}}
Use ... R Data Builder - On Board Memory ====
{{:hardware:cf-mini:cf-mini-configuration:ir_data_builder_mem.png?nolink|}}
U