====== MOD-LRY8 ======
The MOD-LRY8 is a modular unit with 8 x 30VDC 1A Latching Relay ports.\\
Latching relays will remain in their open or closed state on power loss, allowing loads to return to their previous states without interruption.

<WRAP important round 50%>
=== Max Load per Relay Channel ===
30VDC, 1A
</WRAP> 

===== Ports =====
Front of the module has four detachable screw terminal blocks.\\

**Pinout - Top Row, Terminal Block 1**
  - Port 1 Common
  - Port 1 Load
  - Port 2 Common
  - Port 2 Load

**Pinout - Top Row, Terminal Block 2**
  - Port 3 Common
  - Port 3 Load
  - Port 4 Common
  - Port 4 Load

**Pinout - Bottom Row, Terminal Block 1**
  - Port 5 Common
  - Port 5 Load
  - Port 6 Common
  - Port 6 Load

**Pinout - Bottom Row, Terminal Block 2**
  - Port 7 Common
  - Port 7 Load
  - Port 8 Common
  - Port 8 Load

===== Rear Connector =====
The rear of every module contains a module port, used to connect the module into the modular controller base unit (DIN-MOD4, etc). The pinout for this port is not published.